Author Topic: Is it possible to set up the DH89 Face balanced?  (Read 308 times)

gnelson

  • Newbie
  • *
  • Posts: 3
Is it possible to set up the DH89 Face balanced?
« on: February 21, 2018, 10:23:12 PM »
Will the long plumbers neck make the DH89 face balanced.... I still need the offset?

Jazz18

  • Jr. Member
  • **
  • Posts: 90
Re: Is it possible to set up the DH89 Face balanced?
« Reply #1 on: February 22, 2018, 08:07:18 AM »
I'm no expert but I'm pretty sure for a plumbers neck, the longer it is, the less toe hang you get. I'm sure you can have them face balanced.

Jimbobuc21

  • Hero Member
  • *****
  • Posts: 2040
  • If my GIR was higher, my scores would be lower.
Re: Is it possible to set up the DH89 Face balanced?
« Reply #2 on: February 22, 2018, 02:22:47 PM »
Will the long plumbers neck make the DH89 face balanced.... I still need the offset?

To be sure, check with someone like Eddie on this one, but I have a 008X that is face balanced and it is fundamentally a DH89 with a hand bent shaft rather than a PN...

Jimbo 8)
.: Jimbo :.

Tour Exotics EX9 driver and 3 wood
Tour Exotics EXi irons
Tour Exotics 56*/60* Xtreme Spin Black wedges
Tad Moore Pro1, Slighter Portland, Byron Morgan C/S Spud in AlBz, Byron Morgan cc Proto (they rotate)
Xenon Cu 10* currently in the bag

titleistgolf_nirvana

Re: Is it possible to set up the DH89 Face balanced?
« Reply #3 on: February 22, 2018, 06:07:05 PM »
I have a long plumbers neck dh89, at byrons standard lie it will still have slight toe hang....i had mine bent about 4 degrees flat and it is face balanced now
Byron Morgan DH89 Long Plumbers Neck
Byron Morgan GSS DH89
Byron Morgan DH89 Long Slant Neck
Byron Morgan Dakine CS (Luke List)

The Beav

  • Newbie
  • *
  • Posts: 28
Re: Is it possible to set up the DH89 Face balanced?
« Reply #4 on: February 22, 2018, 07:40:37 PM »
The DH89 I just sold was perfectly face balanced.  It was a welded long pipe neck with a 69* lie angle.

dans4fun

Re: Is it possible to set up the DH89 Face balanced?
« Reply #5 on: February 23, 2018, 12:09:27 AM »
 :)

I was under the impression Byron could build anything that you want, could be wrong.

He will probably chime in though.

Dan

bargolf

  • Section Moderator
  • Hero Member
  • *****
  • Posts: 5324
    • barusga
    • BURNT EDGES CONSULTING
Re: Is it possible to set up the DH89 Face balanced?
« Reply #6 on: February 23, 2018, 11:18:47 AM »
:)

I was under the impression Byron could build anything that you want, could be wrong.

He will probably chime in though.

Dan


Yep
Byron Morgan Bombora In-Between Long Pipe
Byron Morgan DaKine Long Pipe
Staff Professional Burnt Edges Consulting
SLDR TP 9.5 TP
SLDR 3 14 degree TP
SLDR TP Hybrids 17 and 21
Nike VR Pro Blades 4-9 KBS Tour S
Clay Long Desig TM 50 and 56