Author Topic: 1 of 1 custom notchback long neck tri-sole - done in 303 satin  (Read 1121 times)

Gioguy21

1 of 1 custom notchback long neck tri-sole - done in 303 satin
« on: December 13, 2016, 08:45:55 AM »
Here's my beauty -- (cannot thank Tom enough; came out better than expected)

Model:  Prototype   (303 STAINLESS STEEL)
Floating Face/Sound Slot: NO
Fabricate/Weld Hosel: YES – LONG PLUMBER NECK; MILL NOTCHBACK
Weight: 360g
Length: 36 inches
Lie:  71 degrees
Loft:  3 degrees  (actual milling)
Sight alignment:     Sight line on the topline (white paint fill)
Sole: '1/1 PROTO'
Initials:  none
Grip:   Slighter/Lamkin Crossline – Black
Shaft:  FST NON-STEPPED steel putter shaft
Cavity:  3 large blue mill dots  (Tiffany paint fill)
Face: Hand stamp “ SLIGHTER ” and “ CUSTOM ”  (black paint fill)
Handstamp NEEDLE LOGO  center of SLIGHTER/CUSTOM handstamping   (Tiffany paint fill)
Milling on face: Fine
Finish:  Non-Glare Satin   
Headcover:  Slighter - Rose and Fire Black Ballistic Nylon

G400 10.5 / Synergy Proto 65TX
'17 M2 3HL 16.5 / HZRDUS T1100 75 6.0 Tipped 3/4"
TP UDI 3i / Tensei Pro White Hybrid 90TX
TP MB Custom '14 blades 4i-PW / Modus 105x
MD3 Forged 52, 58 / TI S400
BBZero Zombee Stinger / 35.5"

Cols_Ears

Re: 1 of 1 custom notchback long neck tri-sole - done in 303 satin
« Reply #1 on: December 14, 2016, 10:48:52 AM »
That's either a very big putter, or your kids first pair of Nike Hightops?!

Nice to see some new putter from Tom.
TM M1 430 10.5° with Fujikura Speeder Tour Spec 6.1 Stiff
TM M1 3HL 17° Fuji Pro95 (Stiff)
Adams ProMini 18° Aerotech HLS880 F4
Ping S55 White Dot  4-PW KBS Tour S
SCOR 4161 wedges 49/53/58 KBS Stiff
Tad Moore Hoffman Blade / James Ingles 12g Custom Flow Neck / MannMade MA66 FN

Gioguy21

Re: 1 of 1 custom notchback long neck tri-sole - done in 303 satin
« Reply #2 on: December 14, 2016, 10:57:02 AM »
That's either a very big putter, or your kids first pair of Nike Hightops?!

Nice to see some new putter from Tom.

lol it's a kids size 6 -- it's the headcover. no kid either (married 2 years)
G400 10.5 / Synergy Proto 65TX
'17 M2 3HL 16.5 / HZRDUS T1100 75 6.0 Tipped 3/4"
TP UDI 3i / Tensei Pro White Hybrid 90TX
TP MB Custom '14 blades 4i-PW / Modus 105x
MD3 Forged 52, 58 / TI S400
BBZero Zombee Stinger / 35.5"

Jimbobuc21

  • Hero Member
  • *****
  • Posts: 2053
  • If my GIR was higher, my scores would be lower.
Re: 1 of 1 custom notchback long neck tri-sole - done in 303 satin
« Reply #3 on: December 14, 2016, 01:34:36 PM »
Tom Slighter makes some really cool stuff... he catches heat sometimes because he does what the customer asks for, which once in a while ruffles feathers.

Good to see something from him as he recently retired to build putters full time.

Jimbo  8)
.: Jimbo :.

Tour Exotics EX9 driver and 3 wood
Tour Exotics EXi irons
Tour Exotics 56*/60* Xtreme Spin Black wedges
Tad Moore Pro1, Slighter Portland, Byron Morgan C/S Spud in AlBz, Byron Morgan cc Proto (they rotate)
Xenon Cu 10* currently in the bag

leftymoose

  • Full Member
  • ***
  • Posts: 243
Re: 1 of 1 custom notchback long neck tri-sole - done in 303 satin
« Reply #4 on: December 14, 2016, 08:01:32 PM »
Love that shape
Xenon Torch CS
Xenon Handmade CS
Xenon Proto 3B CS
Xenon Wide X CS
Lajosi TF3 CS
Lajosi WB Sensor CS
Black Lab Notchback CS
Anton Handmade CS
Slighter CS
Slighter CS #2
Mann WB Rattler CS
Mann Gunslinger CS
Byron Morgan B17 CS
Piretti Workbench CW II CS
Raybon CB+ CS
Carbon Ringo CS
Bradley CS