Author Topic: LH 2200's produced?  (Read 3721 times)

JMac13

LH 2200's produced?
« on: January 16, 2011, 10:48:07 PM »
Does anyone know if the 2200 was ever produced in numbers for lefties? I have seen one that was stamped PM, but it is the only on I have ever seen.
☮ ♥ & Calif☠rnia Flatsticks

Byron Morgan DaKine Radz
Byron Morgan CI-18 Proto
Byron Morgan DaKine-18
Byron Morgan GS DH-89 First off
Byron Morgan Mixed Metal Stubby DH-89

Golfluvzme

  • Section Moderator
  • Hero Member
  • *****
  • Posts: 3114
  • The little guy just working harder, ;-)
    • MannKrafted GolfWorks and Custom Milled Putters
Re: LH 2200's produced?
« Reply #1 on: July 06, 2011, 03:20:43 AM »
I can only say that the "PM" putter was in my possession for a short time and went to a new home.  It rested there for a few months as I tried to track down Bobby and get some sort of authentication. 
It was a handmade 2200 HSM.  Crafted with 8* loft, as Phil likes and done in the fog chrome finish.  Bobby said that there was at least 15 hours of handwork in that putter. 
It was more beautiful in person than in any of the pictures that were shown.
I have some, here and will dig them out and share when I get a chance.
Not a whole lot of the LH 2200's I am thinking.  I can't say as I have EVER seen one of them in the BeCu that was used for a lot of the RH versions.
LaMont in AZ

weakputt

  • Jr. Member
  • **
  • Posts: 97
Re: LH 2200's produced?
« Reply #2 on: February 08, 2012, 09:10:21 AM »
Hey LaMont, have you ever refinished a BeCu 2200 with the HSM insert?
mine is minty, but you can still see areas were the copper was like coated in a goldish overlay.
What types of finishes can be put onto a copper head?
Tad Moore "Barn Find" Mokume insert
'03 Cameron Studio Design 1.5, 1st Run of 500
Grace/MacGregor-"Norman Estates" Sunset
Never Compromise Gamble Series "Straight"
Cleveland TAM-1 c.s. milled Newport style

Golfluvzme

  • Section Moderator
  • Hero Member
  • *****
  • Posts: 3114
  • The little guy just working harder, ;-)
    • MannKrafted GolfWorks and Custom Milled Putters
Re: LH 2200's produced?
« Reply #3 on: February 08, 2012, 12:35:58 PM »
The 2200 HSM is one I would shy away from refinishing.  It would take an instant to ruin that insert and if your putter is minty, it would not be, after a quick slip.
Post some pictures and we'll check it out.  I know that some of the copper 2200's were much better looking than others.  I had Proof #13/100 and it was GORGEOUS! 
Sorry for not wanting to tackle the refinish, but I think caution is sometimes the best route.
LaMont in AZ

weakputt

  • Jr. Member
  • **
  • Posts: 97
Re: LH 2200's produced?
« Reply #4 on: February 09, 2012, 05:38:36 PM »
Thanks LaMont, your the Master. Actually the patina is fine and can more than live with it.
Tad Moore "Barn Find" Mokume insert
'03 Cameron Studio Design 1.5, 1st Run of 500
Grace/MacGregor-"Norman Estates" Sunset
Never Compromise Gamble Series "Straight"
Cleveland TAM-1 c.s. milled Newport style

weakputt

  • Jr. Member
  • **
  • Posts: 97
Re: LH 2200's produced?
« Reply #5 on: February 09, 2012, 10:04:45 PM »
Pics of The 2200 w/ insert.
Tad Moore "Barn Find" Mokume insert
'03 Cameron Studio Design 1.5, 1st Run of 500
Grace/MacGregor-"Norman Estates" Sunset
Never Compromise Gamble Series "Straight"
Cleveland TAM-1 c.s. milled Newport style