Author Topic: New Miura Putters (Read 19733 times)

Chipaputt · « **on:** July 29, 2008, 02:40:07 PM »

Hello,
Miura Golf is back in the putter business. They are beginning a limited release of two Forged / Milled putter models. The plumber's neck putter will be offered in 350 grams (model # MP-005) and 370 grams ( model # MP-006). The blade putter (model # KM-350)will be offered in 350 grams. They have asked me to kick off the US introduction. Here are some pictures and I hope to have heads in stock on Monday August 4th. I am sure I won't have all the answers to your questions right now, but stay tuned. These putters will sell for $390 with a large variety of shaft and grip options. My C & L partner Lee will also be involved in this venture
Thanks,
Chip

Chip Usher
Lee Harville

Chipaputt · « **Reply #1 on:** July 29, 2008, 02:42:42 PM »

More pictures....

JimmyGalls · « **Reply #2 on:** July 29, 2008, 03:06:10 PM »

Chip,

That blade turned out fantastic. It should do well!

Jim

harleygolfer · « **Reply #3 on:** July 29, 2008, 03:36:26 PM »

The blade looks very nice.

Chipaputt · « **Reply #4 on:** July 29, 2008, 03:40:39 PM »

Quote from: harleygolfer on July 29, 2008, 03:36:26 PM

The blade looks very nice.

The Blade is a design that Mr Katsuhiro Miura developed and personally uses. Hence the KM 350 model number.
Chip

johndeere10 · « **Reply #5 on:** July 29, 2008, 03:55:39 PM »

Chip they look very nice... it was nice to see the KM 350 proto and now the production model.

jr · « **Reply #6 on:** July 29, 2008, 04:45:51 PM »

What are they made out of?

Chipaputt · « **Reply #7 on:** July 29, 2008, 05:23:52 PM »

Quote from: JimmyGalls on July 29, 2008, 03:06:10 PM

Chip,

That blade turned out fantastic. It should do well!

Jim

Jim,
Thanks, it does look nice.
Chp

Chipaputt · « **Reply #8 on:** July 29, 2008, 05:30:55 PM »

Quote from: jr on July 29, 2008, 04:45:51 PM

What are they made out of?

Jr,
They are forged from 1025 carbon and then milled to exact specs. These putters are forged in his world famous factory in Himeji Japan. The Blade putter even utilizes a Spin-fused hosel. The Putters have a special plated finish that is called "Black/Silver". So the putter does not need to be oiled.
Chip

HULL17RW · « **Reply #9 on:** July 29, 2008, 08:01:33 PM »

Chip that Blade looks like a winner. Good Luck in this venture

!

Kevin
HULL17RW

braithwaite · « **Reply #10 on:** July 29, 2008, 08:07:16 PM »

Again I will say it, the blade looks great Chip.

gags77 · « **Reply #11 on:** July 29, 2008, 08:20:38 PM »

The putters would look MUCH better if they were lefty!!!!!!!
Alan :w00t: :w00t:

johndeere10 · « **Reply #12 on:** July 29, 2008, 08:24:44 PM »

Alan we can't win them all... I am thankful they do make lefty wedges & irons though...

gags77 · « **Reply #13 on:** July 29, 2008, 08:27:27 PM »

I hear ya. Just had a set of both made for me. Absolutely love them!!
Alan :w00t: :w00t:

apprenti23 · « **Reply #14 on:** July 29, 2008, 08:28:23 PM »

are the miura putters as expensive as the irons? these are lookin pretty plain-jane to me if they are trying to command the price point of the upper-echelon putters (ie mills handmade, bettinardi DASS, etc.) however, if they are sub-$300 putters than i could see it being justified.

JimmyGalls · « **Reply #15 on:** July 29, 2008, 08:33:23 PM »

Price is in the first post.

apprenti23 · « **Reply #16 on:** July 29, 2008, 10:14:56 PM »

not as expensive as I would have thought ($390) for a miura putter. i was thinking they'd be more like $800.

mekeni · « **Reply #17 on:** July 30, 2008, 11:36:01 AM »

Gosh that blade is so sweet! Custom loft, lie?

hoganapex · « **Reply #18 on:** July 30, 2008, 09:06:35 PM »

Quote from: mekeni on July 30, 2008, 11:36:01 AM

Gosh that blade is so sweet! Custom loft, lie?

yes, we build them for you and loft/lie can be adjusted. we can build with multiple shafts such as nippon, TT, or fuji speeder (we have 3 different color in the speeder).

thanks,

lee

Lip Out · « **Reply #19 on:** July 30, 2008, 11:33:29 PM »

Quote from: hoganapex on July 30, 2008, 09:06:35 PM

(we have 3 different color in the speeder).

thanks,

lee

What colors would those be Lee? I now of the black and green.......

johndeere10 · « **Reply #20 on:** July 31, 2008, 09:09:09 AM »

Shamrock.....

JimmyGalls · « **Reply #21 on:** July 31, 2008, 09:39:10 AM »

Quote from: johndeere10 on July 31, 2008, 09:09:09 AM

Shamrock.....

PIMP!

What's the weight on the graphite shafts? Lighter or heavier then a TT steel shaft? Basically would like to know what it will do to SW?

Jim

hoganapex · « **Reply #22 on:** August 01, 2008, 07:54:35 PM »

Quote from: JimmyGalls on July 31, 2008, 09:39:10 AM

Quote from: johndeere10 on July 31, 2008, 09:09:09 AM
Shamrock.....

PIMP!

What's the weight on the graphite shafts? Lighter or heavier then a TT steel shaft? Basically would like to know what it will do to SW?

Jim

jim,
i believe the speeders are around 115 grams, so lighter. i need to double check with chip

golfer40 · « **Reply #23 on:** August 01, 2008, 09:46:46 PM »

That blade looks sweet...whens the due date?

hoganapex · « **Reply #24 on:** August 02, 2008, 11:26:51 AM »

Quote from: golfer40 on August 01, 2008, 09:46:46 PM

That blade looks sweet...whens the due date?

i believe chip will have them this week.

Chipaputt · « **Reply #25 on:** August 02, 2008, 10:06:00 PM »

Hello,
The Miura Putters are coming in Monday Aug 4th. The Speeder Putter shafts weigh around 108 grams.
Thanks,
Chip

mflores · « **Reply #26 on:** August 05, 2008, 09:23:44 AM »

Very nice looking

Chip,

What is the toe hang on each?

Thanks

Stage1350 · « **Reply #27 on:** August 05, 2008, 09:52:51 AM »

How does the blade compare (size wise) to a Wizard 600? Is it compact like the Wizard, or larger like a TPA XVIII?

hoganapex · « **Reply #28 on:** August 05, 2008, 08:58:30 PM »

Quote from: Stage1350 on August 05, 2008, 09:52:51 AM

How does the blade compare (size wise) to a Wizard 600? Is it compact like the Wizard, or larger like a TPA XVIII?

it is compact as it appears in the pics. fairly short heel to toe. Mr Miura's personal design. I had the chance to roll some with the proto and it is a very solid blade - especially with the weight.

Chipaputt · « **Reply #29 on:** August 05, 2008, 10:01:49 PM »

Quote from: mflores on August 05, 2008, 09:23:44 AM

Very nice looking

Chip,

What is the toe hang on each?

Thanks

Hello,
The KM 350 blade hangs almost straight down to 6 o'clock. The MP-005 "Anser style" model hangs at 4.30.
Thanks,
Chip

Chipaputt · « **Reply #30 on:** August 05, 2008, 10:04:28 PM »

Quote from: Stage1350 on August 05, 2008, 09:52:51 AM

How does the blade compare (size wise) to a Wizard 600? Is it compact like the Wizard, or larger like a TPA XVIII?

Hello,
Yes the KM 350 Blade is very compact like Lee (hoganapex) noted. It is close in size to the Wizard 600 and feels very solid.
Thanks,
Chip

Black Shamrock · « **Reply #31 on:** August 09, 2008, 09:13:38 PM »

This is one sweet blade! Thanks, Chip. Here are some comparison pics with my Napa to get a sense of the size.

JimmyGalls · « **Reply #32 on:** September 17, 2008, 02:52:33 PM »

A review would be appreciated I'm sure

RIDE · « **Reply #33 on:** September 18, 2008, 02:22:48 AM »

I really do LOVE that blade!

RIDE

Lefty20 · « **Reply #34 on:** October 20, 2008, 10:24:08 PM »

I simply love the blade model. I would definately make a purchase, if they made them in left handed.

puttermann99 · « **Reply #35 on:** October 21, 2008, 11:40:52 AM »

Just re-shafted the 005. Had it out on the putting green today and it feels soooo soft :w00t:, yet perfectly connected, no loss of head feel at all. This putter is MONEY!

Matt

nobreak1970 · « **Reply #36 on:** November 14, 2008, 08:43:31 PM »

Those are beautiful putters.
I want a blade.

thanks.

mekeni · « **Reply #37 on:** January 01, 2009, 11:44:42 PM »

Anyone gaming the model 350 blade yet? Kindly share a review please?

joshuap · « **Reply #38 on:** March 26, 2009, 12:07:22 PM »

I havent gamed one but i have putted around with one. I love the feel and you can definatly feel the ball come off the face, it doesn't bounce off per se. Its like a soft metal feel... if you can get over the small size then you should defiantly try one

2thDoctor · « **Reply #39 on:** August 15, 2009, 04:33:20 PM »

I received both putters this last week from Chip. I haven't played a round with them yet but just messing around with them here in the house on putting strip, they feel great. Looking forward to gaming them.

chocoboy · « **Reply #40 on:** August 24, 2009, 10:05:50 AM »

How does the km-350 compare to the km-005/mp-005 model? Do they have the same feel? I figure they are both blade type and have the same weight just dufferent hossel. Can't decide which of the two to get. I know I have to try both but I just wanted to get other's perspective.

Thanks!

2thDoctor · « **Reply #41 on:** September 20, 2009, 10:10:24 AM »

I gamed my MP 005 for the first time yesterday and putted lights out. My playing partners kept asking questions about the putter.... Anyway, it's a great putter and if you haven't picked one up, I'd highly suggest you to if you like putters with a 4:30 toe hang.

Jason

News:

Author Topic: New Miura Putters (Read 19733 times)

nobreak1970

joshuap

2thDoctor

chocoboy

2thDoctor