Author Topic: Standard face mill on a Carbon 612?  (Read 732 times)

rclarke1

  • Hero Member
  • *****
  • Posts: 1071
  • trying to get back on course......
Standard face mill on a Carbon 612?
« on: April 15, 2017, 02:03:58 PM »
Can some one answer this please?
TIA-
RC
Xenon X, Ingles .470
RJB7784, RJB8143, RJB7541
Mann MA66, Super Sport, Rattler
Byron GSS DH89, GSS 615 DW, Carbon 612
Carbon Ming, GSS Trad XL, 303 SS Flat T
SRC blade, SRC IKB2

eddiea54

Re: Standard face mill on a Carbon 612?
« Reply #1 on: April 15, 2017, 10:18:33 PM »
Pretty sure it's Tuna #4
ea.byronputters@gmail.com

www.byronputters.com

The Roll Abides

rclarke1

  • Hero Member
  • *****
  • Posts: 1071
  • trying to get back on course......
Re: Standard face mill on a Carbon 612?
« Reply #2 on: April 16, 2017, 02:55:06 PM »
So if I ask for anything else it is a hand mill?
The first DH89 I ordered I asked for deep mill and that was standard at the time - it came with tuna 4 cnc.
Thanks EA!
RC
Xenon X, Ingles .470
RJB7784, RJB8143, RJB7541
Mann MA66, Super Sport, Rattler
Byron GSS DH89, GSS 615 DW, Carbon 612
Carbon Ming, GSS Trad XL, 303 SS Flat T
SRC blade, SRC IKB2

dans4fun

Re: Standard face mill on a Carbon 612?
« Reply #3 on: April 19, 2017, 12:38:07 AM »
 :)

     This is a post from a while back.

http://puttertalk.com/community/index.php?topic=43340.0

     Putter in the middle of the face shots is a 612.  I would have guessed is was the stock mill.  Not sure what it was called though.

     I liked it.

                                   Dan

dans4fun

Re: Standard face mill on a Carbon 612?
« Reply #4 on: April 19, 2017, 12:39:33 AM »
 :)

     Just read your initial post.  This 612 was stainless.

                                   Dan

rclarke1

  • Hero Member
  • *****
  • Posts: 1071
  • trying to get back on course......
Re: Standard face mill on a Carbon 612?
« Reply #5 on: April 19, 2017, 03:12:16 AM »
:)

     This is a post from a while back.

http://puttertalk.com/community/index.php?topic=43340.0

     Putter in the middle of the face shots is a 612.  I would have guessed is was the stock mill.  Not sure what it was called though.

     I liked it.
That is what I am wanting..... :-\
                                   Dan
Xenon X, Ingles .470
RJB7784, RJB8143, RJB7541
Mann MA66, Super Sport, Rattler
Byron GSS DH89, GSS 615 DW, Carbon 612
Carbon Ming, GSS Trad XL, 303 SS Flat T
SRC blade, SRC IKB2

rclarke1

  • Hero Member
  • *****
  • Posts: 1071
  • trying to get back on course......
Re: Standard face mill on a Carbon 612?
« Reply #6 on: April 19, 2017, 11:12:36 PM »
Trigger pulled......;)
Xenon X, Ingles .470
RJB7784, RJB8143, RJB7541
Mann MA66, Super Sport, Rattler
Byron GSS DH89, GSS 615 DW, Carbon 612
Carbon Ming, GSS Trad XL, 303 SS Flat T
SRC blade, SRC IKB2

rclarke1

  • Hero Member
  • *****
  • Posts: 1071
  • trying to get back on course......
Re: Standard face mill on a Carbon 612?
« Reply #7 on: May 17, 2017, 10:34:37 PM »
Turns out stock milling on almost everything now is Tuna4 CNC.
I tossed in for the hand milling this trip. 8)
Xenon X, Ingles .470
RJB7784, RJB8143, RJB7541
Mann MA66, Super Sport, Rattler
Byron GSS DH89, GSS 615 DW, Carbon 612
Carbon Ming, GSS Trad XL, 303 SS Flat T
SRC blade, SRC IKB2

Byron Morgan

  • Hero Member
  • *****
  • Posts: 3338
Re: Standard face mill on a Carbon 612?
« Reply #8 on: May 18, 2017, 09:16:23 PM »
Can some one answer this please?
TIA-
RC

#4 Tuna Mill

rclarke1

  • Hero Member
  • *****
  • Posts: 1071
  • trying to get back on course......
Re: Standard face mill on a Carbon 612?
« Reply #9 on: May 18, 2017, 09:27:24 PM »
Thanks, Byron!
I paid Zman the extra charges for your special TLC on this order, hand face mill and Tai treatment.. ;)
All the best!
RC
Xenon X, Ingles .470
RJB7784, RJB8143, RJB7541
Mann MA66, Super Sport, Rattler
Byron GSS DH89, GSS 615 DW, Carbon 612
Carbon Ming, GSS Trad XL, 303 SS Flat T
SRC blade, SRC IKB2

timastyle

Re: Standard face mill on a Carbon 612?
« Reply #10 on: May 19, 2017, 03:04:20 PM »
Rob - Make sure to get the skinny version for when you decide to part ways with it.  ;)
Byron Morgan:
Byron Morgan GS DH-89 Brushed Stainless with Plow neck (formerly a short pipe high polish blue oil as in my avatar)

Xenon:
Handmade Xenon Damascus Stainless (gamer)

Nead:
On order Albz

rclarke1

  • Hero Member
  • *****
  • Posts: 1071
  • trying to get back on course......
Re: Standard face mill on a Carbon 612?
« Reply #11 on: May 19, 2017, 03:21:04 PM »
Rob - Make sure to get the skinny version for when you decide to part ways with it.  ;)

345 Tony..;)
Xenon X, Ingles .470
RJB7784, RJB8143, RJB7541
Mann MA66, Super Sport, Rattler
Byron GSS DH89, GSS 615 DW, Carbon 612
Carbon Ming, GSS Trad XL, 303 SS Flat T
SRC blade, SRC IKB2

timastyle

Re: Standard face mill on a Carbon 612?
« Reply #12 on: May 19, 2017, 04:37:30 PM »
Getting closer and closer to the skinny side.  You'll end up there I'm sure. 8)
Byron Morgan:
Byron Morgan GS DH-89 Brushed Stainless with Plow neck (formerly a short pipe high polish blue oil as in my avatar)

Xenon:
Handmade Xenon Damascus Stainless (gamer)

Nead:
On order Albz

rclarke1

  • Hero Member
  • *****
  • Posts: 1071
  • trying to get back on course......
Re: Standard face mill on a Carbon 612?
« Reply #13 on: May 30, 2017, 07:16:54 PM »
THANKS, BYRON!!!!! FANTASTIC!!!!! ;D
Xenon X, Ingles .470
RJB7784, RJB8143, RJB7541
Mann MA66, Super Sport, Rattler
Byron GSS DH89, GSS 615 DW, Carbon 612
Carbon Ming, GSS Trad XL, 303 SS Flat T
SRC blade, SRC IKB2

rclarke1

  • Hero Member
  • *****
  • Posts: 1071
  • trying to get back on course......
Re: Standard face mill on a Carbon 612?
« Reply #14 on: May 30, 2017, 07:18:42 PM »
Carbon Blue oil, Tai treatment Hand face mill. Gripmaster black Byron Skull 345 gms 72/3/35
Xenon X, Ingles .470
RJB7784, RJB8143, RJB7541
Mann MA66, Super Sport, Rattler
Byron GSS DH89, GSS 615 DW, Carbon 612
Carbon Ming, GSS Trad XL, 303 SS Flat T
SRC blade, SRC IKB2

howeber

  • Full Member
  • ***
  • Posts: 177
Re: Standard face mill on a Carbon 612?
« Reply #15 on: May 30, 2017, 08:16:06 PM »
Gorgeous!

jsrz3

Re: Standard face mill on a Carbon 612?
« Reply #16 on: May 31, 2017, 01:06:48 AM »
Nice Rob
Morgan Round Pipe DH89 GSS
Morgan Plumbers 006 GSS
Morgan Long Neck Plumbers 615 SS
Morgan DH11 Carbon
Captain Morgan Flow Neck 007 Proto Carbon
Morgan Bombora Round Pipe SS
Morgan Bombora Flow Neck Blade Carbon

Rob McHugh

  • Hero Member
  • *****
  • Posts: 745
  • Try to be the Person Your Dog Thinks You Are
    • Rob McHugh
Re: Standard face mill on a Carbon 612?
« Reply #17 on: May 31, 2017, 06:45:39 AM »
Wolf whistles down here Rob!!! :-)

Rob
Kind regards,
Rob

Gava

  • Sr. Member
  • ****
  • Posts: 340
  • Adam Scott - First Aussie To Win The US Masters
Re: Standard face mill on a Carbon 612?
« Reply #18 on: May 31, 2017, 09:49:16 AM »
Down where Rob..?  :P

Blue oil you say?  Never ceases to amaze me how the color of the finish can vary.

It looks really dark to me - is that because its' on carbon & not stainless?
I'm a member at The Vines in Western Australia.  Look me up if you are visiting.

Byron Morgan

  • Hero Member
  • *****
  • Posts: 3338
Re: Standard face mill on a Carbon 612?
« Reply #19 on: May 31, 2017, 12:26:31 PM »
Down where Rob..?  :P

Blue oil you say?  Never ceases to amaze me how the color of the finish can vary.

It looks really dark to me - is that because its' on carbon & not stainless?

Yes,

Serr

Re: Standard face mill on a Carbon 612?
« Reply #20 on: May 31, 2017, 02:24:08 PM »
Sexy looking flatstick there :) That looks darker then the blue I had on my carbon.